Ahlsen - Terminal blocks, 6-piece electrical connector with operating lever, compact automatic electrical connection terminal, 3 in 6 out

Easy to use: first remove the wire sheath (9-10mm), just slightly push the orange clip up 90°, insert the cable and turn off the switch, instead of traditional insulation tape and staggered end-to-end connectors, technological innovation. Wiring time reduced by 70%. Convenience: These 3 port and 6 port wire connectors are suitable for hard and flexible wires, you can use them to control multiple lights with just one switch, 3 inputs, 6 outputs. Widely used - Universal connector: suitable for 0.08-4mm²/28-12AWG solid wire and flexible wires from 0.08 to 2.5mm²/28-14AWG. It is widely used in building wiring where the space for all connections is limited. Reusable: Each terminal block has a sensor port and can also be recycled. Each connector has an independent spring, different wires are managed separately, and different wire diameters can be safely connected. There is a test hole on the surface of each connector. Tip: The terminals on both sides of the pressure rods are respectively